Bolts right onto the roll bar and protects your valuable radio. Made of lightweight Anodized Grey aluminum. Two sizes to choose from. (1.75" & 1.5")

Model – 21701 – HOT LAP IN CAR TIMING SYSTEM


(Click here to view a picture)

An infra-red transmitter mounted at trackside automatically triggers the in-car timer with 100% accuracy each and every lap. No "thumb" errors. Double range transmitters available where access to the track edge is limited. Works up to 60 feet away.

• Drivers see your lap times as they happen.
• Adjust your driving line to find the fastest time.
• Easy to install and remove.
• 60 lap memory with easy recall
• Transmitter can be mounted inside or outside the track.

Model 2210 – 4 Car Talking StopWatch with memory


(Click here to view a picture)

Very easy to use and computer experience is not necessary. This stopwatch even "talks". You can hear your lap times through an earphone so you don’t have to take your eyes off the track even for a second.

• Time up to four cars at once with lap count
• Time two cars and display Average MPH
• Enter and sort qualifying times
• 100 lap memory with a night light
• Runs on common nine volt batteries

Model 2217 Robic Electronic Stop Watches


(Click here to view a picture)

The full line of stop watches are easy to use and range in features from single lap counting to multi lap and MPH averaging. Padded pouches are available.

Model 22318 – Two car Clipboard


(Click here to view a picture)

Clock two or more cars every lap, easily! Two Robic stopwatches clock every lap, show average MPH, count laps and have an 8 lap memory.

Model 22525 – Lap Time and Race Scoring sheets


(Click here to view a picture)

Lap time & race scoring on back. Punched for 3 ring binder. Packaged two pads with 50 sheets per pad. These are an excellent way to keep track of important racing information.

Model 22528 – Chassis Setup & Tire Chart sheets


(Click here to view a picture)

Chassis Setup on front & Tire Temperature chart on back. Punched for 3 ring binder. Packaged two pads with 50 sheets per pad.

Model 22523 – Weekly Checklist sheets


(Click here to view a picture)

Weekly race prep checklist, so complete it takes up both sides. Punched for 3 ring binder. Packaged two pads with 50 sheets per pad.

Model 2350 – Hood Pin Kits

Two aluminum hood pins, 4 jams nuts, 2 scuff plates and 2 flip style safety pins. Very attractive and functional.

Model 44751 – Accessory Switch Panel


(Click here to view a picture)

4 HD 40 amp switches with weatherproof switch covers, and soldered & heatshrinked connections.

Model 44821 – Single Switch Panel


(Click here to view a picture)

One switch for ignition & start. Down is off; Middle is ignition on; Up is momentary start. (With weatherproof switch cover)

Model 4493 – Heavy Duty 12 Gauge Wiring Harness


(Click here to view a picture)

Make wiring a snap! Plugs into all Longacre switch panels. Color-coded wires match with Longacre dash panel too, for a high quality professional job. Saves time, hassle and confusion.

Model 4580 – Heavy Duty Solenoid Kit with Firewall Start Button


(Click here to view a picture)

High capacity extra heavy-duty metal cased solenoid, wiring harness, and remote starter button all come standard in the complete kit or you can purchase just the solenoid (Model 4590). Model 4570 is a battery thru panel for safely running battery cable through the firewall. Model 4572 (red-pos) and 4574 (black-neg) are battery jumper posts. These make life a lot easier when trying to jump-start or charge the battery.

Model 4805 – Rear Battery Cable Kits


(Click here to view a picture)

The longer your battery cables are, the heavier gauge they need to be. Standard passenger car cables are 49 strand and will not work reliably in a racing application. Kit includes top quality high amp battery cable, end terminals, and color coded terminal boots to prevent arcing, Firebraid insulation, and firewall grommets. Adel clamps and wire ties for a neat and safe installation. (Model 4800) 84 strand 10 foot cable or (Model 4805) 133 strand 13 foot cable systems are available.

Model 45215 – SS Braided Brake Line Kit


(Click here to view a picture)

Complete brake line kit - includes all the parts needed to do the entire car. Includes 4 SS braided lines to go from the chassis to the wheels, an assortment of pre-flared bendable steel chassis lines, connectors, fittings, frame tabs, Adel clamps, and wire ties. Enough parts to do almost any car from midgets to Winston Cup. (Order caliper fittings separately.)
NOTE: NOT for street driven cars

Model 4522 - 4529 – Caliper Fittings

Sizes in #3 and #4. A variety of different shapes and thread sizes.

Model 4522, 1/8" x #4 AN 90 Long Leg Single




Model 4523, 1/8" x #4 AN 90 Sierra, Wilwood 6

Model 45233, 1/8" x #3 AN 90 Sierra, Wilwood 6

Model 4524, 1/8" x #4 AN Straight

Model 45243, 1/8" x #3 AN Straight

Model 4525, 7/16"-20 X #4 AN 90 GM Single

Model 4950 – Firebraid Sleeving


(Click here to view a picture)

High temp, flexible insulating sleeving. Silicone coated fiberglass braid helps keep headers from burning spark plug wires, battery cables, and will insulate fuel and oil lines. WILL NOT burn. Sizes range from 5/16 ID to 1 1/8" ID with various lengths available.

Model 50540 – Durometer


(Click here to view a picture)

This racing tire hardness tester is ideal for knowing when your tires have reached their peak. Tire hardness changes as tires get older, and even varies between new tires. Now you can keep track of exactly where you tires are. Be precise and don’t guess. Comes with a padded carrying pouch.

Model 6415 - Aluminized Insulation Cloth


(Click here to view a picture)

Easy to work with, just cut to shape with scissors. Good insulation for firewall, floor, and tunnel. Aluminized on one side to reflect heat, silicone coated on the other. 58"x24".

Model 6420 - Floor Mats


(Click here to view a picture)

Specially designed for use in drivers compartment. Made from fireproof non-asbestos heavy weight cloth. Silicone coated on one side and aluminized for heat reflection on the other. In the middle is a heavy duty high temp insulation material. Eyelets in the corners to fasten mount with rivets or screws. A driver that's cool and comfortable will win more races.

Model 6485 - Header Insulation Tape


(Click here to view a picture)

Contains exhaust heat for better velocity and scavenging, more power, plus cooler under the hood temperatures. Two-inch wide 100 ft. long roll is enough for most V8 engines. Use to insulate collectors and pipes, mufflers, oil and fuel lines.
Smaller 50 ft. roll (model 6487) is also available.

Model 6570 - ProTecto Roll Bar Padding


(Click here to view a picture)

We use a manufacturing process called Micro-Cell. The cells that make up the material are ultra small, and even in size, giving you a padding with much better cushioning ability than before. The secret is in the blowing agent. The gas is injected into the hot resin during the extrusion process. This blowing agent is not harmful to the environment or the ozone layer.

• Better crash protection
• Flame retardant base
• 36" lengths
• 1" thick padding with offset hole
• 1 5/8" ID for 1 3/8" - 1 3/4" bars

Model 66001 - Aluminum Pit Jacks


(Click here to view a picture)

Two versions to choose from. (same price) One easy-to-use six pump for daily use around the shop. The second a three-pump version for faster pit stops. Both jacks are precision CNC machined from aircraft grade billet aluminum.

Model 66010 "SUPER SPEEDWAY"


(Click here to view a picture)


This style offers fully CNC profile machined from aircraft grade billet aluminum for maximum weight savings with the highest strength. Fast 1 or 3 pump action. Lightweight and durable for when you absolutely must have the best there is!
Model 66010 Speedway - 3 pump (weighs only 31 pounds)
Model 66016 Winston Cup - 1 pump - Includes Extended length steel handle. (weighs only 33 pounds)

Model 66048 - Dirt Skirt


(Click here to view a picture)

An excellent option for your jack to keep it free of debris.

Model 11150 - Race Car Cover


(Click here to view a picture)

Cut specially to fit race cars - Keep your car cooler & cleaner between races.

• Heat reflective silver color
• Soft liner won't scratch paint
• Zippered window to get in and out

Will fit almost all Late Model cars - All Pro, ASA, NW & SW Tour, etc. Moisture resistant.